CP-3000 可绕式电流钳头(3000A) 规格参数
CP-3000 可绕式电流钩头3000A 软式比流器、软式CT
CP-3000 Flexible 3000A current probe
产品特点:
- ‧软式环状可绕式电流钩头(电压输出软式CT)
- ‧可卷绕多圈使用
- ‧易于量测片状汇流排
- ‧易于量测大尺寸非规则排列导体
- ‧易于量测大尺寸窄缝中电线电流
- ‧必须搭配三相电力分析仪DW-6095/DW-6093使用
- 无法用于其他电表
- ‧可单圈或绕两圈使用
产品简介:
- 1.测量范围:30A/300A/3000A三档
- 2.输出讯号-AC:100mv/A、1mV/A、0.1mV/A
- 3.输出电压:3V-AC(30A/300A/3000A)
- 4.钳部圈长:600mm,勾线直径15mm
- 5.工作频率:50/60HZ
- 6.输出讯号线长4米
- 7.产品适用:DW-6093、DW-6095三相电力分析仪
- 8.不同颜色环接头,易于辨识相位
- CP-3000-R 红色可绕式电流钩头3000A
- CP-3000-Y 黄色可绕式电流钩头3000A
- CP-3000-B 蓝色可绕式电流钩头3000A
一般规格:
- 测量范围:30 A/300
A/3000 A, 3 ranges, switch selectable
- 1st range value : 30 A
- 2nd range value : 300 A
- 3rd range value : 3000 A
- 输出灵敏度:100
mV/A, 10 mV/A, 1 mV/A, AC coupled.
- 精确度:± 1% F.S.
- * Accuracy is specified that the measured
conductor's position is on the center of " Flexible current probe ".
- * F.S. : Full scale of range.
- * 50/60 Hz. * 23 ± 5 ℃
- 频率范围:45 to 400
Hz.
- * Accuracy tested under 50/60 Hz.
- 线性:± 0.2 % of
reading value from 10 % to 100% of range value.
- 相位差:< ± 1.5°
- * 50/60 Hz.
- 导电体灵敏度:
- ± 2 % of range value.
- * Recommend the measured conductor position
should > 25 mm ( 1" ) away from the " Probe locker ".
- 外部电场影响:increase
± 1.5 % of range value max.
- * Recommend the distance between different
" Flexibel current probe " should > 200 mm ( 8" ).
- 最低附载:100 K ohm
for specified accuracy.
- 包覆材质:UL 94-V0
rated.
- 安全标准:IEC1010
CAT III 600 V.
- 电源供应:Power
supply is from the meter (DW-6093, DW-6095 ), battery is not necessary.
- * Power supply voltage from DW-6093 ,
DW-6095 is DC 8V± 1V..
- 最大开口孔径:19 mm (
0.75 inch ) Dia.
- 操作温度:0 to 50 ℃ ( 32 to 122 ℉ ).
- 操作湿度:Less than
80 % R.H.
- 体积:Main
circuit unit : 105 x 56.5 x 33 mm. ( 4.1 x 2.2 x 1.3 inch ).
- Flexible probe : 600 mm x 14.5 mm DIA.
23.6 inch x 0.57 inch DIA.
- Cable length : 3.4 meters ( 11.2 feet
).
- DC plug size : 5.5 mm x 2.5 mm DIA.
- 重量:480 g (
1.06 LB ).
CP-3000 可绕式电流钳头(3000A) 详情图解